GN’s new composite shaker screens got very positive feedback after releasing into the market

GN Solids Control is a specialized manufacturer for solid control equipment and mud recycling system. It was first established in China in 2007, after 10 years development, it has become a world famous company in the solid control area and its product range covers from shale shaker, desander, desilter, mud cleaner, mud gas separator, decanter centrifuge, cutting dryer, centrifugal pump, agitator, vacuum degasser, shear pump, submersible pump, etc. GN can be your one stop shop and solution provider for the solid control business. This year GN increased its manufacturing capability dramatically, its second manufacturing facility can make composite framed screens up to 5000 pieces per month. The new facility adopts the latest technology that can manufacture the screen with high quality at competitive prices

The new composite framed shale shaker screens have the follow features: the steel frame part is welded automatically by robot with higher strength and better quality conformity. The injection molded plastic is mixed with imported fiberglass and it can resists high temperature up to 140 degree, and it’s tougher, more endurable and can work under higher vibration G force. . The heat press of the screens adopts the process of four side tensioning which can minimize the gap between the top and support screens and extend the life of the screens. GN’s shaker screens will be 3 layers with the API number above 60, while other screens manufacturer only use 3 layers until API number above 100. And GN’s mesh supplier is the same as DERRICK and MI SWACO’s. GN’s screen adopts the rectangular wire configuration and the wire is 50% more thicker than the square wire configuration, and it could be used up to 300-700 hours. GN’s composite screens cover GN’S OEM screen, MI SWACO MONGOOSE, BRANDT VENOM, BRANDT KING COBRA, FSI, etc. GN can also customize the screens according to customer’s requirement. All the composite screens are repairable. Comparing to steel framed screens, the non blank area of composite framed screen is 10-20% more. And the composite frame is not easily to get rusted and can be stored up to 5 years.

Welcome to visit our website www.gnsolidsamerica.com and get more information, please send your inquiries to sales@gnsolidscontrol.com

Advertisements

GN shaker and centrifuge order regarding Africa Client

Even the necessary oil price is lower, and marketplace is still down. We nonetheless receive some small purchases to support life. The small requests added to help us make it through in the cold season. All of us thanks for the orders during the wintry time and definitely will support together with best price and trustworthy technical support.
160624ShaleShaker
1) Shale shaker from Clients
The client can also be end user for the shale shaker . The client get one liquid mud plant which will supply over 5 territory rigs at same time. On the other hand, the client also recycle a number of drilling mud and drilling waste from the rigsite. The consumer need to use shale shaker to treat the drilling squander management in first step to separate the solids particles. Then, they are drilling to use high speed decanter centrifuge to separate the small ones. Following these treatment, the thoroughly clean drilling mud can go back in liquid mud plant to get reuse.
The clients likewise buy some shale shaker screens, and other one year encouraged spare parts for backup. Whenever you want, the spare parts may meant for the operation.
decanter centrifuge 3
2) Decanter centrifuge to get liquid mud plant
The actual clients choose high speed, shifting speed, high configuration decanter centrifuge, GNLW363CG-VFD. The centrifuge is GN star centrifuge, which have a 90% product sales amount in all centrifuge orders placed. The centrifuge bowl rate can be adjusted from some hundred or so to 3200RPM. The differential speed can also adjusted through 25 to 43. The actual pump feeding speed will also be adjusted with the PLC screen panels.
The high speed centrifuge can be used for solids control, mud cleaning system , waste drinking water treatment, solidification unit, dewatering decanter centrifuge etc . On a yearly basis, we sell over two hundred sets of GNLW363 collection decanter centrifuge, matched with good quality screw pumps to get feeding the decanter centrifuge.

The clients buy a single sets variable speed centrifuge and 1 screw pump for feeding centrifuge and in addition one year spare parts as copy.

As China leading solids control manufacturer of solids control equipment & drilling waste management equipment, GN Solids Control will surely support every client with high quality devices & reasonable price.

GN Solids America is ready for OVER THE COUNTER oil show

After 2 days busy working time, all of us transport our solids control equipment to the OTC olive oil show site, put it inside correct position, and organise the decoration of the present stand and other auxiliary things. Now, we are ready for the approaching visitors. The equipment for the indicate include vertical cuttings dryer, decanter centrifuge, shale shaker. Below will give more details:

Usable cuttings dryer
Vertical cuttings dryer is used for drilling waste management. GN Up and down cuttings dryer is now the actual 4th generation after bettering based with rich work site experience in the past 3-5 yrs. GN Solids Vertical cuttings dryer now can work secure and high efficient throughout hard environment, extreme warm area in Algeria in addition to Kuwait, extreme cold place in Russia.

Decanter centrifuge
Decanter centrifuge is used extensively, different bowl size centrifuge with different speed, can work various application. We have only one product for vertical cuttings dryer, but we have one family members model for centrifuge.
GNLW553 and GNLW453 is GN big bowl, big amount centrifuge which is used for quick drilling. But actually, made clients want to use these product centrifuges because of the higher price tag.

2016 OTC decanter centrifuge

GNLW363 is the most popular unit centrifuge which can be used for several purpose. The 14inch jar centrifuge is equivalent to USA company centrifuge, eg. Derrick DE1000 centrifuge or Swaco 518 centrifuge.
GNLW363 centrifuge works extremely well for oil drilling solids control or drilling spend management. The speed can be adjusted by means of variable speed control panel stepless. This centrifuge might also used for waste water remedy with super high speed 3800RPM.
This time we take latest type GNLW363 centrifuge to OVER THE COUNTER oil show and we are sure that our centrifuge will attract many visitors.

Shale shaker
Put into effect our 4 panel shale shaker GNZS594 there in order to OTC, some shaker screen also there. Including substitution screen for Swaco Mongoose shaker, replacement screen regarding Derrick shaker, replacement screen for NOV brandt california king cobra shaker.

Welcome to OVER THE COUNTER, our stand is 1652-a & 9732. OTC spot: NRG Park, Houston.

GN Solids Control is attending OTC oil show

OTC oil show is much close, which will be hold in 2-5 May, 2016, in Houston, TX, USA. After about 3 month’s preparation, GN Solids Control is ready for the big event now. We have two booths there to deeper our brand influence and we bring our key equipment to show there, including latest model decanter centrifuge, latest model vertical cuttings dryer, High G drying shaker, shaker screen etc. The visitors can feel the high quality and premium technology equipment by touching and watching the real equipment at the event.

1) 14inch bowl size decanter centrifuge
This size centrifuge is most popular as the wide application and good price. The GNLW363 14inch bowl centrifuge is equivalent to Swaco 518 CENTRIFUGE / Derrick DE1000 centrifuge. But the price of USA centrifuge is much higher than our brand. We target on high end market and overseas market. The price is much better when compared with USA brand, but our price is relatively higher than other China brand centrifuge.

OTC 2016

2) GNCD930 vertical cuttings dryer
GNCD930 vertical cuttings dryer is used for drilling cuttings treatment at rigsite or at one mud plant location where all cuttings transport to the center location for final treatment. After treatment of GN vertical cutting s dryer, the oil on cuttings can reduce to below 5%. This is same working performance as CSI dryer or SWACO dryer. GN vertical cuttings dryer already put into market for over 3 years, and the mature product is benefiting more drilling service companies, good price, stable working performance and less maintenance.

3) High G drying shaker
High G drying shale shaker is same as normal shale shaker. Just the G force is bigger. This unit is mostly used for water based mud drilling cuttings treatment. After treated, the oil on cuttings can be reduced to about 10% to 20%.
GN composite material screen, replacement for Swaco Mongoose shaker screen will be also showed at the OTC event.
If you come to the OTC, pls send us email to make an appointment. My email ID: roy@gnsolidscontrol.co, thanks for reading.

More Shale Shaker Screens Just Arrived in Houston

GN Solids Control has established the Houston department company GN Solids America for several years. Although GN Des moines Branch Company is still a fresh company, drilling companies within US, Canada and Paraguay is getting to know GN.
GN Solids America LLC features a large warehouse in Des moines which reaches to thirty three, 000 square feet. Many solids control and drilling waste management systems are in share, such as shale shaker, Mud Gas Separator,mud cleaner, shear pump, decanter centrifuge along with cuttings dryer. Thousands of shaker screens are also stocking throughout Houston warehouse for fast delivery.
GN Solids Control manufactures various shaker displays such as replacement screens intended for Derrick 500 or Derrick 2000 series, replacement projection screens for Swaco Mongoose, alternative screens for NOV VSM 300 or NOV Full Cobra screens.
All GN shaker screens are line mesh weaved and made according to the API RP 13C standard, which is a common typical when name different API nos. GN just opened up another manufacturing plant which pretty closes to GN home office. This new plant will largely manufacture composite material shaker screens.

Composite_Frame_Shaker_Screen
As we usually separate the shaker screens by means of two types: one is metal body shaker screen and the various other is composite frame shaker screen. Composite frame move screen is widely noticed on Mi-Swaco shaker monitors. If you comparing the successful separating area, you will find the upvc composite frame shaker screen possesses more opening area versus the metal frame screen. Along with due to the pretensioned technology, upvc composite material shaerk screens can be utilized longer than the metal framework screens although the composite sort price is a little bit higher.
Through the long run, using composite stuff shaker screens will help to reduce cost for drilling corporations. Many customized shaker projection screens are also provided by GN Solids Control. GN Solids America LLC now is working with quite a few large drilling companies; they help keep purchasing shaker screens via us regularly. GN in addition provides customized logo with all the permission of our clients.

De-sander with Double Layers Screen Panels Drying Shaker

De-sander is very popular equipment used in solids and liquid separation running. It always contains cyclone unit and steel framework. With different diameter of the cone body, this cyclone device could separate the strong particles with different sizes. GN’s de-sander is using 10 ” cyclones which could remove the solids size down to around forty five microns.
GN’s de-sander device is used in drilling business to separate the drilling cuttings from the drilling fluids. Conventional de-sander units don’t have the actual under drying shaker with regard to maximum recovery of the drilling fluids liquid, thus a lot of valuable drilling fluids had been lost. However , this type de-sander and even the de-silter device are very simple structure as well as cost effective.

gn-de-sander-unit-225x300
To make the discharged solids much dryer, GN would rather suggest choosing the de-sander device with a under drying shaker which could recycle much more drilling fluids. This could reduce the waste materials discharges to environment and also the cost on drilling liquids materials. GN has a de-sander model with under drying out shaker of 2 layers displays panel. This unit is actually functioning as both main shale shaker and de-sander unit. The drilling liquids gets into this de-sander device via the mud supplier pipe and then flow at the bottom layer screen firstly with regard to primary solids control. Fluid gets through the screen nylon uppers and falls down to the actual under located mud tank. Large size particles will be released out of the shaker. And then the actual liquid will be transferred with a centrifugal pump unit towards the de-sander cyclone unit with regard to fine solids separation. The actual mixture of liquid and solids discharged from the cyclone can come to the upper layers screen for drying processing. Right here, to prevent the damage of screen mesh resulted by the powerful impact force of solids discharged out from the cyclone device, GN designs small barrier box to cover the store of the cyclone. This barrier box is small sufficient to make the unit more compact.
GN’s double-layer screen panel shale shaker can also be used as just primary shaker for a lot fine solids separation. Apart from de-sander unit, de-silter device can also use this type shaker as drying shaker.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment, welcome to contract to know more info from our sales team.

Features of Solids control mud cleaner

Mud cleaner is a 3-in-1 machine. It is the combination of solids control shale shaker, a desander machine and a desilter machine. The desander cone assembly and desilter cone assembly are mounted on a under flow shale shaker.

GN Solids Control is one of the leading manufacturer for solids control equipment mud cleaner. GN made mud cleaner have a wide application on various applications. It can be used for oil and gas drilling mud solids control systems. It can also be used for slurry separation system. Like in dredging slurry separation system, a number of shale shaker and mud cleaner will be used. Mud cleaner is also used in CBM drilling (coal bed methane), HDD drilling (horizontal directional drilling), piling and micron tunneling.

GN Mud Cleaner

Features of GN made mud cleaner:

1) Polyurethane Material desander and desilter cone for long lifetime.

2) Removable desander and desilter cone assembly mounted on the shale shaker top, when removed the cone assembly, it can be used as a separate shale shaker.

2) Patent  design shaker deck angle adjustable device. It is mechanical type adjustment for the shake deck angle changing, more reliable then the hydraulic type. During working, when operators change either side of the shaker deck angle, both sides goes up and down meanwhile. It is much user friendly and welcomed at the jobsite.

4) Patent design sealing rubber for the shaker deck. It is replaceable and easy for maintenance. It can protect the shale deck well and extend the shale shaker screen lifetime. You do not need to change it duringg screen changing. You only need to change it when needed. Normally, 2~3 time every year.

5) The Shaker bottom deck is made from Stainless Steel for long service life.

6) The complete shaker deck is treated by Heat treatment for High G force operation.

7) Pretensioned Shaker screen for fast screen changing.

8) Famous Brand Vibrating Motors : IEC Ex, ATEX and UL Certified are available.